Simple Tips for Choosing The Right Grease and Oil

Every industry suffers from the pressure of improving its productivity while reducing the cost of production. To maintain safety while achieving that feat, you have to maintain the machines of the factory perfectly. When it comes to maintaining the machines, Grease and Oil plays a crucial role. If you could not choose the right Lubricating Grease for your machine, it would harm the quality of your machine significantly.

To raise your awareness about the Grease and help you choose the best suitable ones, we have collected some of the effective tips. Check the following section of this article to find more about it.

Choose the Right Grease:

Different greases are prepared to keep different priorities in mind. So, to buy the right Synthetic Grease for your equipment, you should consider the circumstances under which your machine would perform. Keep the factors, like machine speed, temperature and load levels in mind to make sure that you buy the suitable one.

The Right Base Oil:

While selecting a grease, you should consider the right viscosity of your Grease Oil. Make sure that the viscosity is perfect for the speed of the application as well as the load. If you choose the oil with the perfect viscosity, it would not only provide the maximum level of protection to your machine but also make sure that your component life enhances as well. The grease and oil with higher viscosity and great for protecting the heavy-duty machines. However, the Greases with the lower viscosity can offer protection to the machines that work at low temperature.

Do not Over Grease:

Incorrect application of the Lubricating Grease is one of the fatal mistakes that you should avoid making at all cost. More than 90 per cent of the bearing failure accidents take place due to over greasing of the machines. If you over grease the machines, the lubricant can migrate to other parts of your machine creating issues of motors. Always make sure not to fill a bearing with more than two-third parts of Grease.

Incompatibility:

Before applying new Synthetic Grease to your machine, you should thoroughly flush out the old grease from the bearing. It would save you from the compatibility issues and will make sure that the new grease performs at the top level.

So, these are some of the basic factors that you have to keep in mind while choosing Grease Oil for your machine. It would help you to enhance the life span of the pieces of equipment while improving the lifespan.